background image

HAZARD IDENTIFICATION

Definitions for identifying the various hazard 
 levels are  provided below .

This safety alert symbol indicates 
important safety messages . When 
you see this symbol, be alert to the 
possibility of personal injury . 

Carefully read and fully understand the message 
that follows .

 DANGER

•  The use of the word “DANGER”  identifies 

an immediate hazard with a likelihood 
of death or serious personal injury if 
instructions, including recommended 
precautions, are not followed.

 WARNING

•  The use of the word “WARNING” 

 identifies the presence of hazards 
or unsafe practices that could result 
in death or  serious personal injury if 
instructions, including recommended 
precautions, are not followed.

 CAUTION

•  The use of the word “CAUTION” 

identifies possible hazards or unsafe 
practices that could result in personal 
injury and product or property damage 
if instructions, including recommended 
 precautions, are not followed.

NOTICE

•  The use of the word “NOTICE” identifies 

special instructions that are important 
but not related to hazards.

OPERATOR SAFETY 

INSTRUCTIONS

The VAPS1672 Pipe Stand is designed for 
the sole purpose of supporting pipe to be roll 
grooved . These instructions must be read and 
understood by each operator PRIOR to working 
with the stand . These instructions describe 
safe operation of the stand, including set up 
and maintenance . Each operator must become 
familiar with the stand’s operations, applications, 
and limitations . Particular care should be given 
to reading and understanding the dangers, 
warnings, and cautions described throughout 
these operating instructions .
Use of this stand requires dexterity and 
mechanical skills, as well as sound safety 
habits . Although this stand is designed and 
manufactured for safe, dependable operation, 
it is difficult to anticipate all combinations of 
circumstances that could result in an accident . 
The following instructions are recommended 
for safe operation of this stand . The operator is 
cautioned to always practice “safety first”  
during each phase of use, including set up  
and maintenance . It is the responsibility of the 
lessee or user of this stand to ensure that all 
operators read this manual and fully understand 
the operation of this stand .
Store this manual in a clean, dry area where  
it is always readily available . Additional copies  
of this manual are available upon request 
through Victaulic, or can be downloaded at  
victaulic .com .

4

REV_B

TM-VAPS1672 

/ Operating and Maintenance Instructions Manual

Summary of Contents for VAPS1672

















Reviews: