MAINTENANCE
This section provides information about
maintaining the pipe stand in proper operating
condition . Replacement parts must be ordered
from Victaulic to ensure proper and safe
operation of the pipe stand .
1.
Clean the upper, intermediate, and bottom
columns with a wire brush to remove any
debris .
2.
Regular lubrication is required for the pipe
stand . On a monthly basis, apply a dry
graphite spray to the upper, intermediate,
and bottom columns . Work the dry
graphite in by using the ratchet to lower
and raise the roller support .
3.
On a monthly basis, apply chain lubricant
to the entire length of the chain .
4.
Lubricate the threaded roll shaft/hex nut
assemblies that retain the polyethylene
wheels .
PARTS ORDERING
INFORMATION
When ordering parts, the following information
is required for Victaulic to process the order and
send the correct part(s) . Parts can be ordered
by calling 1-800-PICK VIC .
1.
Tool Model Number
2.
Tool Serial Number
3.
Quantity, Item Number, Part Number, and
Description
4.
Where to send the part(s) – Company
Name and Address
5.
To whose attention to send the part(s) –
Person’s Name
6.
Purchase Order Number
7.
Billing Address
14
REV_B
TM-VAPS1672
/ Operating and Maintenance Instructions Manual
Summary of Contents for VAPS1672
Page 2: ......
