4 . Remove the polyethylene wheel from
underneath the roller support, as shown
above .
5a.
Install the polyethylene wheel into the new
location on the roller support .
5b.
Insert the threaded roll shaft/hex nut
assembly with flat washer through the roller
support and polyethylene wheel .
6.
Install a flat washer and hex lock nut onto
the end of the threaded roll shaft/hex nut
assembly .
7.
Tighten the hex lock nut completely to
retain the polyethylene wheel .
8.
Repeat steps 2–7 to relocate the other
three polyethylene wheels to the new
locations on the roller support .
9.
Ensure that all wheels are secure and that
they have full freedom of movement before
proceeding .
11
REV_B
TM-VAPS1672
/ Operating and Maintenance Instructions Manual
Summary of Contents for VAPS1672
Page 2: ......