Exos® CORVAULT™ Getting Started
Part Number 83-00007770-10-01, E • June 2022
Thank you for purchasing a Seagate storage product. This document provides an overview of product setup tasks and identifies
locations for information you need to accomplish each task in product documentation.
WARNING!
Non-compliance could void your warranty. To safely mount the storage enclosure in a rack cabinet, you must
follow all directions exactly as specified in the Rackmount Guide in this shipkit and in the identified hardware documentation.
Retain original packaging materials for use with returns. For storage enclosure returns, the master container must ship on a pallet.
Product setup
Seagate requires the person using these instructions to be a qualified technician, trained to perform installation and maintenance
of Seagate storage products. Use the Rackmount Guide and the video to direct you during initial installation.
For help, contact Technical Support at 1-800-SEAGATE or
. You must provide the following data:
l
Issue subject and detailed issue description
l
Product type and serial number
l
Part number of product or FRU experiencing a fault condition
l
System logs* related to the fault condition
*To obtain system logs, see the Storage Management Guide.
Shipkit item
Quantity
Storage enclosure with or without drive modules
1
Accessory kit box*
1
Railkit box
1
Cable management arm (CMA) box
1
NOTE
All power cords, included or obtained, must comply with applicable Seagate standards and requirements.
Installation checklist
Use this checklist, performing each task only in the sequence presented after successful completion of the prior step.
Step
Task
Reference
1
Complete all installation prerequisites.
Identified below.
2
Unpack the storage enclosure.
Unpack and prepare the storage enclosure topic
3
Prepare the site for installation into the rack cabinet.
Unpack and prepare the storage enclosure topic
4
For rackmount installation, temporarily place all drive modules in a static-protected area.
5
Install the rackmount kit in the rack cabinet.
Install the rackmount rail kit
6
Mount the storage enclosure into the rack cabinet.
Install the storage enclosure
7
Install drive modules in the storage enclosure.
Install drive carriers in the storage enclosure
8
Connect all power cords and data cables.
Route power cords and data cables
9
Route storage enclosure cables to a compatible host.
Route and connect power cords and data cables
