Vicon VN-301T, Installation & Operation Manual

Page: 12 / 35

4
•
Chapter 3 - Installation XX159-07-00 Rev 1010 VN-301T Single-Channel Digital Video Server
Chapter 3 - Installation
For first-time installers, these steps provide the most thorough and accurate instructions.
About This Chapter
This chapter details the complete installation of the VN-301T Single Channel Digital Video Encoder. The
following sections provide information as follows:
Unpacking the Server defines how to remove the unit and accessories from the box.
Required Items for Installation defines items needed for installation.
Unit Components defines all connections on the front panel and their use.
Mounting defines all methods of securing the server for permanent use.
Installing the VN-301T describes how to install all necessary peripheral devices directly to the server.
Unpacking the Server
Carefully open the carton. Remove the Accessory Kit and the server from the box and place them on a large,
flat working surface. Open the Accessory Kit and verify the contents against the list in Table 1-1.
Required Items for Installation
To properly install the server there must be simple hand tools available such as a screwdriver, wrenches,
pliers and wire cutters/strippers. To setup the server for operation there must be a PC computer running the
ViconNet software or a Kollector recorder networked to the server.