XX159-07-00 Rev 1010 VN-301T Single-Channel Digital Video Server
Chapter 4 - Operation
•
19
ViconNet Configuration
After the camera dome has been setup with the proper IP address, configuration features from a remote
workstation, server or recorder are available as follows.
•
A network settings screen is used to modify the camera dome’s IP parameters. This allows great
flexibility in network setup.
Note: This setup can be performed from any VN-WS/VN-NVR workstation connected to the VN-301T and to
the Nucleus or from a Kollector.
1.
Verify that the camera is connected to the network, that it is active and that it is configured to use the
same
Nucleus.
2.
From the workstation desktop, run the ViconNet application.
3.
After logging in, open the site setup selection window.
4.
Select the IP dome camera setup.
5. Open
the
Network Setup and Site Name
setup window.
Network Settings
window will display.
See Figure below.
6.
Change the required parameters and click OK. (See your IT administrator for specific network
parameters.)
Application
of the camera will restart.
Network Settings Window
•
An Authorization screen is used to establish authority levels, by user group. Functions such as PTZ
and video view, record and playback can be set for authority level.
•
A priority screen is used to establish video quality and FPS levels.
Summary of Contents for VN-301T
Page 2: ......
Page 8: ......
Page 20: ...12 Chapter 4 Operation XX159 07 00 Rev 1010 VN 301T Single Channel Digital Video Server...
