Vicon surveyor X971, Installation And Operation Manual

Page: 40 / 53

Verifying Proper Operation
Setup a remote keypad via RS-422 or a V1902VCT Vicoax Control Transmitter via composite video to the
Mini Dome. Power-on the control device and verify that it boots up. Setup the control device for operation
with the Mini Dome in accordance with its Installation and Operation Manual.
For a Vicon model V1300X-RVC or V1300X-DVC use the following procedure to access Surveyor
programming:
1. Slide the keypad’s PGM-RUN switch to the PGM position.
2. Press the PP ENTER key; the PRESET LED displays a blinking 0.
3. Press the 9 and 4 numeric keys in that order.
4. Press the PP ENTER key again. The
PRESET LED display remains with the
number 94 and the monitor displays the
Surveyor Main Menu, as shown in Figure
30.
Figure 30
Main Menu
5. Setup the Surveyor as desired using the
remote keypad. Proper operation has
been verified.
For a Vicon Model V1902VCT or V1422 use
the following procedure to access Surveyor
programming:
1. Slide the keypad’s PGM-RUN switch to the
PGM position.
2. Press the PP ENTER key; the PRESET
LED displays a blinking 0.
3. Press the A/P and Auxiliary 2 keys
simultaneously.
4. The monitor displays the Surveyor Main
Menu, as shown in Figure 30.
26
•
Operation X971 Rev 1098 Surveyor Mini Dome System