Vicon surveyor X971, Installation And Operation Manual

Page: 38 / 53

If It It Is Necessary to Remove the Trim Ring
1. Insert a small flat blade
screwdriver behind one of
the four slots on the Trim
Ring inner edge as shown in
Figure 27. Gently pull down
on the screwdriver while
pulling down on the Trim
Ring outer edge until it
becomes unseated. Repeat
this on the remaining three
latches.
Figure 27
Trim Ring Removal
2. With all four latches
unseated, pull straight down
on the Trim Ring outside
edge, with two hands, until it
snaps out of place.
24
•
Disassembling the Mini Dome X971 Rev 1098 Surveyor Mini Dome System