Housings
The V7USD-V2 is the indoor Housing for the Surveyor system. It can be suspended from a piece of 1.5-inch
pipe or Vicon mount (pendant), directly to a Solid (Hard) Ceiling or into a Dropped (suspended) ceiling via a
structural grid assembly. All required installation hardware is supplied.
A plastic, color-coordinated Trim Ring is included with the Housing. This Trim Ring is used for hard and
suspended ceiling installations. It is equipped with four tabs for attachment to slots in the Housing. In
addition, four circular knockouts can be removed for attachment to a Solid Ceiling via screws.
The V7USD-W-VS is the Outdoor Housing. It is comprised of the V7USD-V2 Housing, a Sunshield, internal
Heater and Blower assembly, a modified Trim Ring and a clear Lower Outdoor Dome. An optional chrome
metallized Lower Outdoor Dome is available.
The Trim Ring for the Surveyor Outdoor Housing is specially fitted with a foam barrier for outdoor
applications. It is referred to as Trim Ring with Foam Filter. This ring provides a Housing to Lower Outdoor
Dome seal.
CAUTION:
For environments subject to moisture, use the outdoor Housing.
Drive Mechanism Assembly
The V7UVS-RPX is the variable-speed Drive for the Surveyor system. Integral to the frame is a precision
pan-and-tilt-Drive assembly, a two-piece PC Board Assembly, Camera and Lens platform and Housing
mechanism latch. It provides accurate positioning for the Camera and Lens Module.
Camera/Lens Module
The Camera/Lens Module comes in two basic types; high-resolution monochrome and color. All Camera and
Lens Modules boast an extremely small and lightweight package with advanced features. These Camera
Modules offer state-of-the-art technology in a compact size.
Lower Dome
The Lower Dome is a 7.75 inch (19.7 cm) diameter unit made of acrylic plastic. There are three versions of
this dome; smoke, chrome or gold finish.
V7UFR Fire-Resistant Shield
The V7UFR Fire-Resistant Shield is a metal cover for the indoor, ceiling mounted Housing. It is constructed
of sheet aluminum with an alodine finish. This cover is required by the fire code of certain local
municipalities. It was designed to attach to the Housing top four screw holes. It can be mounted with the
Dropped Ceiling kit or into a Solid Ceiling using the same hardware.
2
•
Introduction
X971 Rev 1098 Surveyor Mini Dome System
Summary of Contents for surveyor X971
