Vicon RF121 R, Operation Manual

Page: 25 / 61

23
EN
16657715_en 05/2006
4 Installation and
adjustments
Danger!
Adjusting, maintenance and repair work
is only to be carried out when the motor
is switched off and the machine is at a
standstill. Remove ignition key.
4.1 Tractor equipment necessary
The necessary PTO shaft speed to operate the round
baler is 540 rpm.
The PTO shaft must guarantee operation independent
of the tractor coupling.
To control the hydraulic functions, the round baler
requires:
a single-acting control unit (one remote connection)
a double-acting control unit (two remote
connections)
A three-pin socket that meets the DIN 9680
specifications must be provided on the tractor for current
supply to the "machine-box". The current supply for
lighting is drawn from a seven-pin plug.
When using the optionally available pneumatic/
hydraulic 40 km/h brake axles, the appropriate tractor
connections are necessary.