Vicon RF121 R, Operation Manual

Page: 52 / 61

50
EN
16657715_en 05/2006
Tips for practical use:
Number of hoops:
for optimum bale consistency, it is advisable to have
more hoops for straw than for green products.
Pressing density:
as a general rule, more pressing pressure for moist/
wet products, less for dryer products.
Pressing pressure:
for very dry, brittle straw, reduce the pressing
density or swivel out the blades to prevent a
standstill of the bales.
5.10 Storing the Round Baler
Before unhitching the Round Baler, remove the pto
drive shaft, disconnect the electric cable and the
hydraulic couplers from the tractor (Release pressure
in the system first - briefly open the tailgate, then return
to zero setting) and lower the prop stand as follows:
Raise the supporting foot with the crank.
Pull out the retention bolt and insert the lower section
of the supporting foot.
Re-insert the retention bolt in the lower hold and
secure.
Place chock blocks under the wheels before
unhitching the Round Baler.
Danger!
Store machine on a level area only and
place chock blocks under the wheels to
ensure the machine will not move away.