Vicon RF121 R, Operation Manual

Page: 47 / 61

45
EN
16657715_en 05/2006
The twine wrapping system does not require any
maintenance.
Correct length of the twine carriage tensioning chain:
44 mm. Chain has to tensioned if lengthening occurs.
Note:
In automatic mode, it is advisable to
continue on past the stop signal for several
meters depending on the swath size. This
especially applies to the 121 R where
picking up the swath binds the yarn reliably
and tightly into the bale at start of the
binding process.
5.5.3 Net wrapping
When the round baler is equipped with a net wrapping
system, the crop can be bound into bales with a stable
shape with a preselected number of net wraps.
Net tying can be activated automatically or manually
via the control box. The number of net wraps
(2/3/4) is set on the machine box (see chapter 5.1.3).
A second container holding another net reel is available
as an optional extra for exclusive net tying. If the
machine has also been fitted out for twine tying, then
the mounted container for twine reels can also be used
to hold a second net reel.
Danger!
Turn off the tractor engine and withdraw
the ignition key. Wait until the machine is
standing still before loading a new net
reel and threading the net. Do not reach
into the area of net feed-in! Danger of
injury by the separating knife!
Note:
The binding process must run when the
nominal r.p.m. has been set, as otherwise
the net cannot be struck off.