Vicon Pilot Lite V1522, Installation And Operation Manual

Page: 78 / 138

3-38
|
Chapter 3 Configuration
XX196-00 Pilot Lite
Alarm Action
The Alarm Action screen is used to select the priority level and video
switching actions to take place when alarms are activated. This screen
applies to all alarms, regardless of type (RS-232, receiver or X-IA input
alarms). Up to 32 alarm inputs are available.
The alarm inputs are listed by number in the Alarm Input # column in the 2-
column table on the left. Selecting an alarm input number in that column will
cause the alarm input number to be displayed in the 5-column table Alarm
Input #. You can then set the parameters for alarm input by selecting the field
columns, which are described in the following table. A description of each
field parameter is displayed on the screen when the field is selected.
Field Description
Priority
Used to assign a priority level to an alarm input. Up to
33 priority levels are available (0 to 32) with the lower
numbers having a higher priority. #### indicates the
alarm is being used as a trigger input. Refer to the
Admin section for more information on trigger inputs.