Creating a Configuration
|
3-17
Pilot Lite
XX196-00
Cameras
You can set various parameters for all or select cameras in the system up to
the system maximum of 32. To begin, access the Cameras screen by
selecting it from the menu bar or by double-clicking it in the system summary.
The Preset Titles and Camera Partitions menus are also described or
referenced in this section.
The cameras are listed by number in the Camera # column. The parameters
that can be set for each camera are contained in the field columns, which are
described in the following table. A description of each field parameter is
displayed on the screen when the field is selected.
Field Description
Receiver Model
Sets the PTZ receiver's family model number or Fixed
Camera for camera only. Options are: Fixed Camera;
V12xx; V13xx; Dome; Vicoax; Simplex.
Notes:
1. Selecting Fixed Camera will remove that
Receiver number assignment from the system.
2. If a dome camera is set to Simplex, response
from that dome will not be processed,
including receiver alarms.
Summary of Contents for Pilot Lite V1522
