Vicon Cruiser SN660V, Installation And Operation Manual

Page: 32 / 86

26
MOTOR SETUP
Motor Setup menu provides the pan and tilt speed of a camera. User can set the desired
speed by pushing the
Joystick to the left or right.
MOTOR SETUP
PROPORTIONAL P/T : ON
P/T MODE : NORMAL
SAVE AND EXIT(ESC TO CANCEL)
PROPORTIONAL P/T : ON/OFF
P/T MODE : SLOW/NORMAL/TURBO
SLOW MAXIMUM SPEED: 40
°
/second
NORMAL MAXIMUM SPEED: 90
°
/second
TURBO MAXIMUM SPEED: 380
°
/second
PASSWORD EDIT
PASSWORD EDIT SETUP
(CTRL KEY)
INPUT PASSWORD
PASSWORD :
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z 0 1 2 3
4 5 6 7 8 9 ( )
SAVE AND EXIT(ESC TO CANCEL)
You can change the password with a 6-digit character in this menu.
The default password is
555555 .
When the password enable is on, the input password window displays to enter the menu.
At this time, move the cursor to the desired character with the
Joystick and press the
Open IRIS key.
ORIGIN CHECK
If you find the dome in the wrong position during operation, execute the origin check; the
dome camera will return to the right position after the origin check operation.
ORIGIN CHECK
ARE YOU SURE ?
CANCEL
OK