Vicon Cruiser SN660V, Installation And Operation Manual

Page: 15 / 86

9
Chapter 3 — Program and Operation
Note: The use of certain keypads may limit the functionality of the unit, for example the number
of available presets or patterns.
3.1 Dome Camera Selection
Before you program or operate a dome camera, you must select the dome camera by pressing
No. + CAM keys.
Example
:
Pressing 1 , 0 + CAM keys sequentially will select dome camera 10. The selected
dome camera ID will be displayed on the LCD monitor of the keyboard controller.
3.2 Accessing the On-Screen Menu Utility
You can call up the On-screen menu utility (OSD) on your monitor by pressing the P95P key on
the keyboard controller; the following on-screen menu utility will appear:
Note: Throughout this manual, P**P (where ** is the Preset number) means pressing the Preset
key, entering the Preset number and then pressing the Preset key again.
DOME MENU
AUTO SCAN
PRESET
TOUR
PATTERN
AREA TITLE
PRIVACY ZONE
CAMERA
DOME SETUP
DOME COMMUNICATION
FUNCTION RUN
EXIT(ESC TO EXIT)
3.3 How to control the On-Screen Menu Utility
Function Button
Call the On-screen menu utility.
P95P
Navigate through the menu items. Joystick up or down
Go into the sub-menu items. Joystick left or right or Open IRIS
Change value.
Enter the editing title mode.
Joystick left or right or
ZOOM In , ZOOM Out
Change value of angle. Open IRIS + Joystick
Enter the changing angle mode.
Open IRIS
Exit the changing angle mode. Close IRIS
Escape (EXIT) P96P