58
4) Network
Settings in regard to network can be executed. Settings for IP, DNS, Host Name, Port, and
ARP/Ping can be established, along with setting for DDNS, uPnP and QoS.
①
Basic
• IP Address Configuration:
- Obtain IP address via DHCP:
Dynamic Host Configuration Protocol (DHCP) is a
protocol that lets network administrators centrally manage and automate the
assignment of IP addresses on a network. DHCP is enabled by default. Although a
DHCP server is mostly used to set an IP address dynamically, it is also possible to
use it to set a static, known IP address for a particular MAC address.
- Use the following IP address:
To use a static IP address for the network camera,
check the radio button and then make the following settings:
*
IP address:
Specify a unique IP address for your network camera.
*
Subnet mask:
Specify the mask for the subnet the network camera is located on.
*
Default router:
Specify the IP address of the default router (gateway) used for
connecting devices attached to different networks and network segments.
• IPv6 Address Configuration:
Check this box to enable IPv6. Other settings for IPv6 are configured in the network
router.
Summary of Contents for Cruiser SN660V
Page 1: ......
Page 82: ...76 Figure Dimension...
