15
Example
: Preset 001>002>003>004>005>006, Auto Scan 01 starts at Preset 002, ends at
Preset 003, Auto Scan 02 starts at Preset 005, ends at Preset 006; Tour 001, 002,
A01, 004, A02.
1
2 2~3
4
5~6, repeat
where
: Quick move, ~ : Programmed
3.7 Pattern
(Shortcut:
P80P
)
The Pattern feature records user control of the selected dome camera. Up to 8 Patterns can be
stored and played back.
PATTERN SETUP
(CTRL KEY)
NO TITLE SEC PERCENT
01 : P01 000 00.0%
02 : P02 000 00.0%
03 : P03 000 00.0%
04 : P04 000 00.0%
05 : P04 000 00.0%
06 : P04 000 00.0%
07 : P04 000 00.0%
08 : P04 000 00.0%
TOTAL 000 00.0%
SAVE AND EXIT(ESC TO CANCEL)
Follow steps below to program the Pattern:
1. Press the
P95P
key to display the main menu on the monitor. Scroll to Pattern and push the
Joystick
to the right to enter the Pattern menu. Or just press the
P80P
key on the keyboard.
2. Select the desired Pattern to be programmed by pushing the
Joystick
up or down. If the
pattern is not 000, a pattern has already been recorded. Patterns can be overwritten.
3. Press the
Open IRIS
key;
the “CTRL” displays. Move the position and the zoom position.
Press the
Close IRIS
key; the “CTRL” disappears.
4. To edit the “
TITLE
”, follow the procedure of the Auto Scan, above, to edit titles.
5. Select “
SAVE AND EXIT
” and push the
Joystick
to the right or press the
Open IRIS
key.
Press
the
Close IRIS
key to exit the program without saving.
NOTE: If pattern recording time reaches 200 seconds, it will automatically stop for a moment.
Press the
P80P
key on the title field to display the small OSD. The screen will show as below.
PATTERN AREA SETUP
(CTRL KEY)
NUMBER 01
000 00.0%
000 00.0%
EXIT(ESC TO EXIT)
The setting procedure is the same as above.
Summary of Contents for Cruiser SN660V
Page 1: ......
Page 82: ...76 Figure Dimension...
