Vicon Cruiser SN660V, Installation And Operation Manual

Page: 22 / 86

16
3.8 Area Title
Enter a specific name on programmed angle between START and END. For the screen below,
when the camera points at an angle between 124.3
°
(PAN), 30.7
°
(TILT) to 359.5
°
(PAN), 45.4
°
(TILT), ABC will be displayed on the screen.
AREA TITLE SETUP
NUMBER : 01
TITLE : ABC
START ANGLE : 124.3 30.7
END ANGLE : 359.5 45.4
SWAP : OFF
SAVE AND EXIT(ESC TO CANCEL)
NUMBER : 01 ~ 16
TITLE : Up to 12 characters.
SWAP : Swap the start point for the end point.
1. Select “ NUMBER ” and set the desired number by pushing the Joystick to the left or right.
2. To edit the “ TITLE ”, follow the procedure of the Auto Scan, above, to edit titles.
3. Select “ START ANGLE ”. Press the Open IRIS key: the “CTRL” displays. Move to the desired
position. Press the Close IRIS key; the “CTRL” disappears. To adjust at the 0.1 degree
interval, twist the Joystick at the pan field and the tilt field.
4. Select “ END ANGLE ”. Press the Open IRIS key; the “CTRL” displays. Move to the desired
position. Press the Close IRIS key; the “CTRL” disappears. To adjust at the 0.1 degree
interval, twist the Joystick at the pan field and the tilt field.
5. Select “ SWAP ”. Set to ON to exchange the start angle and the end angle.
6. Select “ SAVE AND EXIT ” and push the Joystick to the right or press the Open IRIS key.
Press the Close IRIS key to exit the program without saving.