Viavi SmartClass OLT-85 Manual Download Page 7

Page: 7 / 99

OLT-85/OLT-85P

1 I

NTRODUCTION

YMBOLS

USED

THIS

OPERATING

MANUAL

To download the latest user manual:

Visit the Viavi web site at

http://updatemyunit.net

Select your SmartClass™ Fiber model from the product line.

Open the download area and download the latest user

manual.

Symbols used in this operating manual

Various elements are used in this operating manual to draw

attention to special meanings or important points in the text.

Symbols and terms used in warnings

The following warnings, symbols, and terms are used in this

document in compliance with the American National Standard

ANSI Z535.6-2011:

NOTICE

Follow the instructions carefully to avoid

damage to or

destruction of the instrument.

CAUTION

Follow the instructions carefully to avoid a low or medium risk

injury to persons.

WARNING

Follow the instructions carefully to avoid

severe injury

persons.

DANGER

Follow the instructions carefully to avoid

death

severe

injury

to persons.

High voltage

Follow the instructions carefully to avoid

damage

to the

instrument or

severe injury

to persons.

This safety instruction is given if the danger is due to

high

voltage

Laser

Follow the instructions carefully to avoid

damage

to the

instrument or

severe injury

to persons.

This safety instruction is given if the danger is due to

laser

radiation

. Information specifying the laser class is also given.

Summary of Contents for SmartClass OLT-85




































































































Search results

Summary of Contents for SmartClass OLT-85

Reviews:

Related manuals for SmartClass OLT-85

Brands by name

Popular brands

Viavi SmartClass OLT-85, Manual

Search results

Summary of Contents for SmartClass OLT-85

Reviews:

Related manuals for SmartClass OLT-85

Brands by name

Popular brands