Viavi SmartClass OLT-85, Manual

Page: 46 / 99

46 OLT-85/OLT-85P
7 P
OWERMETER
O
PERATION
S
ETTING AND SELECTING WAVELENGTHS
1. Select the desired wavelength.
2. Press the
[
A
]
key and tap the [ Delete
 
button.
To edit the reference value:
I
The Edit  Table menu in Powermeter mode is displayed.
1. Select the desired wavelength.
2. Press the
[
A
]
key and tap the [ Edit Reference ] button.
3. Type in the desired value.
4. Tap the [ OK ] button.
To edit the Pass/Fail limit for

value:
I
The Edit

Table menu in Powermeter mode is displayed.
1. Select the desired wavelength.
2. Press the
[
A
]
key and tap the [ Edit Limit ] button.
3. Type in the desired value.
4. Tap the [ OK ] button.
To show or hide wavelengths:
NOTE: A wavelength with a checkmark can be selected by taping the
wavelength field on the measurement display. The wavelengths
shown in the  table accessed by the
[
A
]
menu (
[
A
]
>  ) are
not affected by the settings.
I
The Edit  Table menu in Powermeter mode is displayed.
1. Select the desired wavelength.
2. To set/remove the checkmark, press the center key within the
arrow keys.
– or –
Tap the desired wavelength.
Selecting a wavelength from the  table
I
The instrument is in Powermeter mode.
J
Tap the lower left side of the touchscreen until the desired
wavelength is displayed.
If you miss a wavelength you have to add it to the  table or
enable the Show option.
– or –
Press the
[
A
]
key, tap the [   button and tap a wavelength.