Viavi SmartClass OLT-85 Manual Download

Page: 21 / 99

OLT-85/OLT-85P

3 G

ETTING

TARTED

ONNECTING

OPTICAL

CABLES

To operate the OLT-85 from AC power:

Connect the PS4 DC power cord to the OLT-85 external power

supply connector.

(The connector is under the cover on the right side.)

Plug the PS4 into the AC line socket.

The OLT-85 switches on automatically when powered by the

PS4.

NOTE:

The PS4 provides power even if dry or rechargeable batteries are

inserted in the instrument.

The OLT-85 cannot be powered via the USB interface.

Connecting optical cables

Mounting test adapters

Viavi provides a number of test adapters for connecting the

OLT-85 to the interface to be tested.

You can connect all standard optical connector types to the

instrument using these adapters. The test adapters are suitable

for connectors with planar (PC) and angled end surfaces (APC).

Contact your local Viavi sales company for available adapter

types.

The OLT-85 connector type must match the cable connector

type:

PC: BN 2325/01/05, BN 2326/01/05
The PC/APC versions are easily identified by the colors of the

name labels on the front:

• PC = blue

• APC = green

Summary of Contents for SmartClass OLT-85




































































































Search results

Summary of Contents for SmartClass OLT-85

Reviews:

Related manuals for SmartClass OLT-85

Brands by name

Popular brands

Viavi SmartClass OLT-85, Manual

Search results

Summary of Contents for SmartClass OLT-85

Reviews:

Related manuals for SmartClass OLT-85

Brands by name

Popular brands