Viavi SmartClass OLT-85, Manual

Page: 67 / 99

OLT-85/OLT-85P 67
10 P
ROBE
/PCM O
PERATION
C
ONFIGURING THE
D
IGITAL
P
ROBE
NOTE: To return to a Live image, press the QuickCapture™ key or press
the
[
A
]
key and tap the [ Live ] button to view both the live image
and a test result simultaneously.
If the test has been passed, the image has a green colored frame.
If failed, the frame is red.
Fig. 25 Pass/Fail analysis – overlay view
Magnification Control
The Magnification Control allows you to modify the live display
from high to low magnification and vice-versa. In the high
magnification mode, automatic centering is available.
Picture selected: Live
Picture selected: Test
Save allows you to save the selected picture in the current
selected group in the disk of the instrument. Press the
[
G
]
key,
enter a name for the JPG file, and validate.
Overlay allows you to display or hide the limits of each zone and
the defaults on an image from a test result.
Magnification Control allows you to switch all the images from
Digital Probe test results from high to low magnification and
vice-versa.
Test Allows you to launch a (new) test of the connector
(see “Launching a test of the connector and fiber
end-face” on page 65 )
Freeze Allows you to freeze the live image and to save it
later on the disk. Once this key is pressed, the freeze
image is automatically set to position 2.