Viavi SmartClass OLT-85, Manual

Page: 37 / 99

OLT-85/OLT-85P 37
5 M
ANAGING PROJECTS
D
ELETING A PROJECT
Select a project using the up/down arrow key and press the
central key.
The edit menu opens:
2. Edit the fields.
The changes are immediately effective.
3. Press the
[
F
]
button to close the edit menu.
Deleting a project
1. Select the project you wish to delete.
2. Press the
[
A
]
key and tap [ Remove ] .
3. Tap [ Yes ] to permanently delete the project.
The project is deleted and removed from the list.
Activating a project
To assign measurements to a project, the project must be
activated. There can always be only one active project.
1. Select the project you wish to activate.
2. Tap the button.
– or –
Press the
[
A
]
key and tap [ Set Active ] .
Allow a few seconds until the label ACTIVE is displayed at the
selected project.
NOTE: Savings of measurement results are assigned to the selected
project.
Name Project name
Description Project description
Will be shown in the projects list below the
project name.
Label Prefix Prefix that will be added to the label.
Label Index Start index for the label
Auto Increment
Label Index
When enabled label index will be incremented
automatically with each storage.