Viavi SmartClass OLT-85 Manual Download

Page: 18 / 99

OLT-85/OLT-85P

3 G

ETTING

TARTED

NPACKING

THE

INSTRUMENT

NOTE:

Rechargeable AA batteries will not be recharged in the

instrument. For AA-type rechargeable batteries please use an

external charger.

It is not possible to charge the rechargeable AA batteries or the

RBP2 Li-Ion Battery Pack via the USB interface.
The instrument is powered by the PS4 Universal AC/DC Power

Supply if the PS4 Universal AC/DC Power Supply and the USB

interface are both connected.

Deep discharge

A rechargeable battery that appears to be dead (unit will not

turn on even when connected to external power) may well be in

a deep discharge state. It can be fully charged with the following

charging cycle:

Plug in the power cord for 1–1.5 hours.

Battery should be partly charged now.

Switch the power on.

If the instrument starts: Let the battery fully charge.

– or –

If the instrument does not start:

Unplug power cord, plug it back in and repeat steps 1 and 2.

NOTE:

If the battery is completely deep-discharged, this cycle might

need to be repeated up to 3 times.

General tips on using batteries

• Always handle batteries with care.

• Do not drop or damage the batteries or expose them to

excessively high temperatures.

• Do not store the batteries for more than one or two days at

very high temperatures (e.g. in a vehicle), either separately or

inserted in the instrument.

• Do not leave discharged batteries in the instrument for a long

time if it is not being used.

Summary of Contents for SmartClass OLT-85




































































































Search results

Summary of Contents for SmartClass OLT-85

Reviews:

Related manuals for SmartClass OLT-85

Brands by name

Popular brands

Viavi SmartClass OLT-85, Manual

Search results

Summary of Contents for SmartClass OLT-85

Reviews:

Related manuals for SmartClass OLT-85

Brands by name

Popular brands