Viavi SmartClass OLT-85 Manual Download

Page: 17 / 99

OLT-85/OLT-85P

3 G

ETTING

TARTED

NPACKING

THE

INSTRUMENT

Replacing batteries

Fig. 4

Replacing the batteries

The battery compartment is on the back of the instrument.

Press down the latch to release and to open the lid of the

battery compartment.

Insert new batteries in the tray or remove the used batteries

from the tray and replace all eight with fresh ones.

NOTE:

Take care to insert the batteries correctly. The correct polarity is

indicated by a diagram inside the battery compartment.

– or –

Insert new or replace the RBP2 Li-Ion Battery Pack.

– or –

Switch from non-rechargeable batteries to rechargeable ones

by replacing the battery tray with a new battery pack (or vice

versa).

Close the battery compartment.

Press the

[

]

key to switch on.

Recharging the batteries

The rechargeable RBP2 Li-Ion Battery Pack recharges when the

PS4 Universal AC/DC Power Supply is used to power the

instrument. The instrument switches to trickle charging

automatically as soon as the RBP2 Li-Ion Battery Pack is fully

charged.

RBP2 Li-Ion Battery Pack

Latch lock

AA battery tray

Summary of Contents for SmartClass OLT-85




































































































Search results

Summary of Contents for SmartClass OLT-85

Reviews:

Related manuals for SmartClass OLT-85

Brands by name

Popular brands

Viavi SmartClass OLT-85, Manual

Search results

Summary of Contents for SmartClass OLT-85

Reviews:

Related manuals for SmartClass OLT-85

Brands by name

Popular brands