Viavi OneAdvisor ONA-800 Getting Started Manual Download Page 58

Page: 58 / 75

Chapter 3

Powermeter and VFL

Using the power meter

ONA-800 Getting Started Guide

April 2022

22142812, R011

Page 39

•

When

Keep Result

is pressed, a measurement result is displayed in the table.

•

The

softkey deletes all the results displayed in the table.

•

If the Alarm function has been activated, any result that exceeds the selected

thresholds appears in red in the table. Otherwise, the results are shown in green

in the table.

•

Results in the table are kept when the instrument is switched off.

Commands of the power meter parameters

When the Power meter function is selected, the following softkeys are available on the

results page:

•

Wavelength

— Selects the wavelength

•

Unit

— Choice of the unit

On the results page, the following actions are available:

•

Standard Reference

— Selects the current result as a reference value to

measure the insertion of a link. This reference is displayed under the measure

ment result until a new reference is performed.

•

Keep Result

— Keeps the result on the corresponding line of the table.

•

Clear Table

— Deletes all the results displayed in the table.

Clear Table

appears

as an

Performing a measurement

The Powermeter is started as soon as the function is activated in the

Home

menu.

Power measurement

The following procedure describes how to perform a power measurement.

To perform a power measurement

Connect the light source to be tested to the Powermeter connector, as described

“Connection to the power meter and VFL” on page 32

In the configuration menu, choose the units
–

dBm

–

Watts.

CAUTION

Power measurement is automatically updated. The value <-60dB is displayed

when the laser is switched off and if the source output is looped on to the power

meter input.

Summary of Contents for OneAdvisor ONA-800












































































Search results

Summary of Contents for OneAdvisor ONA-800

Reviews:

Related manuals for OneAdvisor ONA-800

Brands by name

Popular brands

Viavi OneAdvisor ONA-800, Getting Started Manual

Search results

Summary of Contents for OneAdvisor ONA-800

Reviews:

Related manuals for OneAdvisor ONA-800

Brands by name

Popular brands