Viavi OneAdvisor ONA-800 Getting Started Manual Download Page 63

Page: 63 / 75

Chapter 4

Smart Access Anywhere

About Smart Access Anywhere

ONA-800 Getting Started Guide

Page 44

22142812, R011

April 2022

About Smart Access Anywhere

Smart Access Anywhere allows you to view and control the instrument’s user interface

from a remote location using a workstation. In addition to configuring the instrument and

performing tests, you can transfer files to and from the instrument using the instru

ment’s file manager utility. You can also rename and delete files, or create, rename, and

delete directories.

Licensing

To use Smart Access Anywhere, you must have a license. Contact your VIAVI sales

representative for more information about obtaining a license.

Downloading and extracting the utility

The

Smart Access Anywhere

utility must be downloaded and extracted on the work

station that you intend to use to connect remotely to the test instrument.

To download the utility

On your workstation, open a browser and type the following address:

http://smartaccess.updatemyunit.net

Click on the

SmartAccessAnywhere_Vxx.xx.xx.zip

link.

Select

Save

in the dialog box.

After the download is complete, the browser can be closed.

Go to the download directory, then extract the files in the zip file into the desired

destination directory.

The utility is downloaded and extracted.

Establishing a connection

You can connect remotely to your test instrument using a 1) wired Ethernet connection,

2) WiFi connection, or 3) Smartphone with Data Tethering. Before establishing a

NOTE:

You do not need administrator privileges to install the utility on your workstation. The

utility will be downloaded as a zip file.

Summary of Contents for OneAdvisor ONA-800












































































Search results

Summary of Contents for OneAdvisor ONA-800

Reviews:

Related manuals for OneAdvisor ONA-800

Brands by name

Popular brands

Viavi OneAdvisor ONA-800, Getting Started Manual

Search results

Summary of Contents for OneAdvisor ONA-800

Reviews:

Related manuals for OneAdvisor ONA-800

Brands by name

Popular brands