Viavi 87339, Operation Manual

Page: 62 / 198

Testing
3 - 21
3.2.10 Route Edit Edit Window
The Route Edit Edit Window is used to configure individual waypoints, including the
Altitude Rate, Speed, Acceleration and Turn Radius used during dynamic simulations.
Fig. 3-12 Route Edit Edit Window
Control Component Description
Name
Alpha Numeric Pad: Allows editing of selected waypoint name.
Latitude Numeric Pad: Latitude entered in decimal format
Example: 37
o
39.0000N (37 degrees, 39.0000 minutes North)
Sign: N or S.
Longitude Numeric Pad: Longitude entered in decimal format
Example: 97
o
26.0000E (97 degrees, 26.0000 minutes East)
Sign: E or W.
Altitude Numeric Pad: Altitude: 0 to 100,000 ft in 1 ft steps or 0 to
18,288 M in 1 M steps.
Turn Radius Numeric Pad: Turn Radius: 3.281 to 328,084 ft in .001 ft steps
or 1 to 100,000 m in .001 m steps.
NOTE: To calculate the minimum turning radius of the body in
motion, the following calculation can be performed using the
individual speed and acceleration of each route point.
Speed (squared) m/s
Turn Radius = ----------------------------
Acceleration m/s/s
NOTE: The separation between waypoints should be greater
than four times the turning radius between the waypoints.
Acceleration Numeric Pad: Acceleration: +/-328.084 ft/s^2 in .001 ft/s^2
steps or +/- 100 m/s^2 in .001 m/s^2 steps.
Speed Numeric Pad: Speed: 0 to 1150.000 Mph in .001 Mph steps or
0 to 1850.745 Km/h in .001 Km/h steps.