Viavi 87339, Operation Manual

Page: 46 / 198

Testing
3 - 5
3.2.2 Setup Simulation Window
The Setup Simulation Window is used to configure the test set operational parameters.
Fig. 3-4 Setup Simulation Window
Control Component Description
GNSS Drop Down Selections:
GPS - Only GPS satellites simulated.
Galileo - Only Galileo satellites simulated.
GPS+Galileo - Both GPS and Galileo satellites simulated, the
number of SV’s per system is dependent on the GNSS
Allocation (dual mode) settings on the Setup Channels
Window.
Carrier
Drop down menu provides selection of carrier, carrier is
dependent on GNSS selection in Setup.
Drop Down Selections:
GPS - L1, L1C, L2, L2C, L5, L1 no P(y)
Galileo - E1, E5, E5A
GPS + Galileo - L1/E1, L5/E5
Simulation Drop Down Selections:
Static - Single waypoint entry fixed position simulator.
Dynamic - Position simulation is dynamically changing
according to parameter entries in Route and Waypoint
Windows.
Trajectory - Position simulation is dynamically changing
according to data read from an NMEA sentence file loaded
through the File menu screen.