5
ENGLISH
2. On the ‘RF Channel Number’ item, press
L
or
R
to select the channel you want.
To save your changes, highlight ‘Save New Settings’ then press
OK
, or to cancel, press
BACK
.
Setting up your remote control for your TV
You can set up your remote control to operate the basic features of your TV. This enables
you to control your TV and your box with just one remote control.
Code search
To program your remote control to operate your television, you must first use the remote
control to find the four-digit code the corresponds to your television brand. During this
code search you will run through every available code in the remote control’s library.
To search for your television code:
1. Make sure that you television is switched on.
2. Press the
TV
button on your remote control and release it.
3. Press and hold down
SETUP
, until the red LED under the TV button blinks twice.
4. Use the
number
buttons to enter
9 9 1
. The red LED under the TV button blinks
twice.
5. Aim the remote control at your television and press
S
.
6. Aim the remote control at your television, and press
ch +
repeatedly, until your
television turns off (each time you press
ch +
the remote control sends a POWER
(TV off) signal using the next TV code contained in the remote control’s library).
You may have to press
ch +
many times (up to 150 times). The code search can take
up to 15 minutes. If you skip a code, you can search through the previous code(s) by
pressing
ch -
.
Remember to keep pointing the remote control at your television during the code
search.
7. As soon as the television switches off, press
SETUP
to store this code. The red LED
under the TV button blinks twice.
8. Once it is set up, you can switch the remote control to operate your
TV
by first
pressing the TV button. To switch back to operating your box, press the
VIASAT
button.
❖
Setup
