38
Using your Viasat box
Manual recording
Some channels, for example radio channels, do not provide programme listings in the
channel banner or EPG. However, you can still use your box to record these channels, by
using the Setup screens to set up the recording.
Press the
SETUP
button on your remote control. The System Setup screen displays
(see also page 41).
Press
D
to highlight ‘Manual Recording’ then press
OK
. The Manual Recording screen
displays.
You set up the recording as follows:
1. Select the channel to record by using
L
or
R
to look through the channel names.
2. Press
D
to highlight ‘Day’, then use
L
or
R
to select the day on which you want to
record the channel you have chosen.
3. Press
D
to highlight ‘Start Time’, then use the
number
buttons to enter the time you
want the recording to start using the ‘24-hour clock’.While ‘Start Time’ is highlighted,
if you make a mistake, you can press
BACK
to delete the numbers you have entered
and start again.
4. Press
D
to highlight ‘End Time’, then, in the same way as you entered the Start Time,
use your remote control to enter the time you want the recording to finish.
5. Press
D
to highlight ‘Frequency’, then use
L
or
R
to choose how often you want to
record this channel at the time you have chosen. You can choose from Once, Daily
(every day starting from the day you chose in step 2), Mon-Fri (every weekday) or
Weekly (once a week on the same day).
6. Press
D
to highlight ‘Add Manual Recording’ then press
OK
. Your Planner displays,
with the new Manual Recording added to it. If you want to set up any more
recordings, redisplay the Manual Recording screen then start again from step 1.
Note
If you selected Daily, Mon-Fri or Weekly in step 5, the Series Link symbol (see page 20)
displays next to the Record symbol to show that the recording will take place more than
once. You can press
i
to check details of when the recordings will take place.
❖
◆
◆
Recording Programmes