53
ENGLISH
The Installation Setup menu displays:
Changing the LNB Setup
Before making any changes to the LNB Setup, check which of the following two types of
LNB you have.
Universal
see
To change the LNB Setup (for Universal LNBs)
SatCR
see
To change the LNB Setup (for SatCR LNBs)
Note
The default values for a standard Universal LNB (shown on the image on page 53) are already
entered for this setting; under normal circumstances you do not need to change these. If you change
your satellite dish installation, you may need to change this setting so that your box can tune to all the
satellites available.
To change the LNB Setup (for Universal LNBs)
1. On the Installation Setup menu, highlight ‘LNB Setup’, then press OK.
The LNB Setup menu displays:
2 Highlight ‘LNB Type’, then press
L
or
R
to select ‘Universal’.
3. Highlight ‘Number of LNBs’, then press
L
or
R
to select the number of LNBs you
have in your set-up.
4. Highlight ‘Low Band LO Frequency (GHz)’, then use the
number
buttons to enter
the appropriate frequency. If the number is below 10.000, add a leading zero (for
example, 09.750).
◆
◆
Setup
