ViaMichelin X-980T, User Manual

Page: 45 / 123

39
When ViaMichelin Navigation is removed from its mounting system, disconnected from the PC
or from the electrical supply, a small icon on the top bar gives the level of battery charge.
6.1.4.2. Time
•
Click “
Time
”
.
•
By clicking the left and right arrows, you can change the time (hours and minutes) on
your ViaMichelin Navigation X-980T.
Or
•
Click the hour or the minutes to access the list and select the time you want.
6.1.4.3. Button Lighting On/Off
•
Click “
Button Lighting On
” for permanent lighting for the buttons located on the sides
of ViaMichelin Navigation X-980T.
•
Click “
Button Lighting Off
” for temporary lighting for the buttons located on the sides
of ViaMichelin Navigation X-980T. The buttons light up for 3 seconds after one is
pressed.
6.1.4.4. Brightness
•
Click “
Brightness
”.
•
Click the bar to move the cursor to the desired level or click the cursor and move it to the
brightness level you want for the screen.
6.1.4.5. Peripherals
•
Click “
Peripherals
”.
•
Click:
-
Headphone On to obtain navigation voice instructions through the headphone
connected to the jack located under the ViaMichelin Navigation X-
980T. This function cuts out the speaker built in to the PND
mounting system.
- TMC antenna On to receive the TMC/RDS traffic information signal when you
connect the wire antenna and get the sound through the speaker
built in to the PND mounting system.