16
•
Safety
thermostat
•
round head screw and cross-recessed screw M4 x 6 (2 pc) for safety thermostat gripping
•
boiler drum shell incl. ash-pan – manual regime
•
connection accessories for boiler drum shell (spring clip – 4 pc, junction stud – 4 pc,
screw ST4,8 x 13 – 10 pc)
•
basement shell
•
connection accessories for basement shell (screw ST 4,2 x 9,5 – 4 pc, screw ST 4,8 x 13 – 8pc)
•
connection accessories for basement shell gripping to the basement (washer 8,4 – 4 pc, nut M8 – 4 pc)
•
ash-pan – automatic regime
•
boiler mastic – tube 310 ml
•
spacing fastener (2 pc)
•
screws ST 4,8 x 13 (2 pc) for spacing fasteners gripping
•
bushings PG 13,5 (2 pc)
•
bushings PG 11 (2 pc)
•
hexagon head screws M10 x 30 (4 pc) and washers 10 (4 pc) for gripping the fuel feeder set to the
basement
•
hexagon head screws M8 x 20 (4 pc) and washers 8 (4 pc) for gripping the fuel reservoir to the fuel
feeder
•
filling and drain tap Js 1/2“ (1 pc)
•
draught regulator complete (1 pc)
•
plug Js 6/4“ blind (1 pc)
•
sealing
φ
60 x 48 x 2 (1 pc)
•
choker screw (1 pc)
•
draw rod with hanaccording to for smoke flap control (1 pc)
•
grommet HEYCO (2 pc)
•
label for smoke flap control (1 pc)
•
flange of heating and return water 2“ (2 pc)
•
sealing
φ
90 x 60 x 3 (2 pc)
•
handling key (1 pc)
•
cleaning tools (hook, brush with hanaccording to, tang, dowel 8 mm – 2 pc, straight threaded rivet 5x60
– 2 pc)
•
boiler service and installation manual incl. the certificate of warranty
•
list of contractual service organizations
•
siseal 10 g
•
thermostatic valve BVTS (Danfoss) or TS 130 (Honeywell) or STS 20 (Watts)
•
cast iron grate (large diameter)
•
set inbus screw M12 x 16 (4 pc)
•
boiler sensor QAZ 36.526/109
•
sensor against fuel fire penetration QAZ 36.526/109
•
outside sensor QAC 34/101 (necessary for the full and basic version for equithermal control)
•
thermostatic valve (filling valve) - series VTC312 (external thread) made by ESBE (minimum
temperature of return water is 45
o
C) (ord. code: 5100 15 00)
Obligatory accessories for mixing heating circuit (not included in the delivery):
•
Heating branch sensor QAD 36/101 (Siemens)
•
Three-way mixing valve VBI31.20 with drive SQK34.00 (Siemens)
•
Water heater thermostat type: 7K1.6R326.00A (capillary length: 1000 mm, range: 0 - 60 oC) (in case
boiler will be used for HW heating)
Obligatory accessories for pump heating circuit (not included in the delivery):
•
Hot water sensor QAZ36.526/109 (in case boiler will be used for HW heating) (Siemens)
•
Three-way valve V4044F (in case boiler will be used for HW heating) (Honeywell). – in this case only the
phase, working and protective conductors will be connected. Note: also V4044C valve can be used.
Obligatory accessories (not included in the delivery):
•
After-cooling loop (1pc) incl. flange or two-way safety valve DBV 1 – 02 incl. siseal (10 g). This
equipment needn’t be used in case of open heating system.
•
Thermostatic valve BVTS (Danfoss) or TS 130 (Honeywell) or STS 20 (Watts) TV 95 °C
–
can be bought
in warehouses
(only in case of delivery with after- cooling loop)
•
Safety valve (1 pc) according to the maximum boiler operating overpressure (see tab. no. 1)
