Viadrus GARDE G 42 ECO, Manual For Operation And Installation

Page: 53 / 60

53
Intended for user VIADRUS a.s.
Bezru č ova 300
735 81 Bohumín
Guarantee certificate and Quality and completeness certificate for
VIADRUS GARDE G 42 boiler… and VIADRUS GARDE G 42 ECO…
Boiler serial number ..............................….. Boiler output .........................................
User (surname, name) ………………………………………………………………………………………
Address (street, town, postcode) ………………………………………………………………………………………
Telephone/Fax ………………………………………………………………………………………
Gas operating overpressure: 18 mbar natural gas 3 mbar propane
The boiler complies with requirements:
Č SN 07 0240 Warm-water and law-pressure steam boilers
EN 297 Gas – fired central heating boilers – Type B
11
and B
11BS
fitted with atmospheric burners of nominal
heat input not exeeding 70 kW
VIADRUS a.s. provides the guarantee:
– For boilers 24 months after the boiler putting into operation, but maximum 30 months after the date it was
dispatched from the manufacturing factory.
–
For boiler drum 10 years after the date its dispatch from the manufacturing factory.
Adjustment according to the boiler installation and operation manual will be carried out by a contracting service
organization.
The completeness and the output adjustment according to „ Operation and installation manual“ is guaranteed
by the manufacturer through the contracting service organization.
The guarantee certificate is invalid without having been filled in.
Stoking test results:
Measured values
Numeric value Units
Rated thermal output
minimal
Rated thermal output
maximal
Gas inlet pressure mbar
Pressure on the nozzle mbar
Gas consumption per an hour (gas-meter data) m3.h-1
The user confirms that:
•
the boiler adjusted by the contracting service organization didn’t show any defect during the stoking test
•
he received the „Operation and installation manual“ with properly filled in Guarantee certificate and Quality certificate
•
he was acquainted with boiler operation and maintenance
…………………………………….. …………………………………….. ……………………………………..
Manufacture date Manufacturer’s stamp Controlled by (signature)
…………………………………….. ……………………………………... ……………………………………..
Date of installation Installation company
(stamp, signature)
User’s signature
……………………………………. …………………………………….. ……………………………………..
Date of putting into operation Contractual service organization
(stamp, signature)
User’s signature