Viadrus GARDE G 42 ECO, Manual For Operation And Installation

Page: 13 / 60

13
- combustion products return flow fuse reset
- boiler thermostat (delivered as standard with 0 - 85°C range)
The control panel is then equipped with a combined thermometer and manometer. The combustion products
return flow fuse sensor is installed in horizontal draught diverter and it shuts down the boiler in case of an
insufficient combustion products drawing-off.
The boiler and safety thermostat sensors are installed in a reservoir (in upper part of left outer section), the
manometer return valve is crewed in upper part of right outer section.
ioniza č ní
elektroda
šroub
elektrod
zapalovací
elektroda
Fig. no. 4a) Polidoro ignition pilot burner
zapalovací
elektroda
hlídací
elektroda
Fig. no. 4b) Furigas ignition pilot burner
izolace
ho
ř ákové
desky
zapalovací
ho
ř á č ek
ho ř áková
trubice
ho ř áková
deska
p
ř
ívod
plynu
difuzor
ho
ř
ákové
trubice
tryska
hlavního
ho
ř áku
plynový
rozd
ě
lova
č
Fig. no. 5 Polidoro ignition pilot burner positioning above the burner (dimensions in mm)
ionising electrode
electrodes screw
ignition electrode
NOZZLES TABLE
Nozzles diameter (mm)
NOZZLE
NATURAL GAS
0,45
NOZZLE
PROPAN
0,24
watching electrode
ignition electrode
NOZZLES TABLE
Nozzles diameter (mm)
NOZZLE
NATURAL GAS
0,4
burner plate
insulation
ignition pilot
turner
burner tube burner plate
gas supply
burner tube diffuser
gas distributor
main burner nozzle