36
Positioning of a boiler with regard to the necessary handling space:
−
in front of boiler there must be left the handling space minimum 1000 mm
−
minimum distance between the rear part of boiler and the wall is 400 mm
−
at least from one side part there must be kept the space for accessing the rear part of boiler (minimum
600 mm)
−
minimum distance from the side wall is 200 mm, in case of delivery together with heater OV 100L it can
be positioned alongside the boiler from the left and right hand side (the boiler shell at this way of
installation can only be dismantled after the heater shell has been dismantled)
Air supply requirements:
The boiler can only be installed in a room with a sufficient air supply according to EN 1775
"Gas supply- Pipelines in buildings– maximum operating pressure
≤
5 bar – Operating requirements".
Positioning on boiler equipped with forced combustion products venting
The conditions for gas fuels appliances combustion products venting outfall on the exterior wall (façade) are
prescribed by TPG Technical rules - G 800 01 equipment for gas combustion.
10. Delivery and assembly
10.1 Delivery and accessories
VIADRUS GARDE G 42 boiler is delivered in an assembled conditions, on a pallet, protected by a foil and
equipped (optionally) by one of four offered types of regulation (see chap. 1.1).
Standard accessories to all boiler variants:
Conductor inlets PG 9
4 pcs
Conductor inlets PG 11
4 pcs
Blind flanges PG 9
4 pcs
Blind flanges PG 11
4 pcs
Automatic bleeder valve
1 pc
TE joint reduced 90° 1 x 1/2“
2 pcs
Discharge valve
1 pc
Retaining plate 425315 REGULUS
1 pc
Screw F/H 4,8 x 13
1 pc
Brush for boiler drum mechanical cleaning 1 pc
Manual for boiler operation and installation, incl.
the guarantee certificate
sect.
2
3
4
5
6
7
screw M 4 x 8
pc
5
5
5
7
7
14
washer
¯
4,3
pc
10
10
10
14
14
28
nut M 4
pc
5
5
5
7
7
14
Optionally:
VIADRUS OV 100L stack heater
- Honeywell V 4044F three-way valve (for preferential HWS heating)
- UPS 25-40 circulation pump
- Js 1“ clack valve with a flange for pump connection
- Spherical valve Js 1“with a flange for pump connection
OSV combustion products ventilator incl. optional accessories according to tab. no. 8a, 8b
- R 60/80 Reduction
φ
60 /80 (OSV standard delivery)
- T 80
Pipe 76/80 – 1 m with sealing
- T 80/T1
Pipe 76/80 – 0,93 m without sealing
- T 80/T0,5 Pipe 76/80 – 0,5 m without sealing
- K 45
Elbow 45° O/M-with sealing
- K 90
Elbow90° O/M-with sealing
- O 90
Bend 90° (Rs 100) M/M-with sealing
- TK 80
Pipe 1 m with an end piece
- M 80
Cuff internal, external
- 134 B
Slip-on head (through the roof) Ø 80x174
Regulation according to purchase order specification code:
-
Space thermostat CM 707
-
Outdoor thermostat REGO type 95001 (for boiler equipped 2° gas valve)
-
Regulation A1: 1 pc regulator RVA 43.222 set of connectors SVA 43.222, terminal board WAGO 63
with a conductor bundle 43, submersible sensor B2 (type QAZ 21).
Summary of Contents for GARDE G 42 ECO
