Vetland V1410 User Manual Download Page 59

Page: 59 / 113

V1410 / V1412 User Manual

29. ST Analysis

The ST level is measured by horizontal comparison between the PR-segment and the ST-segment. The

user can choose from J point to 8 kinds of ST-measurement point (80, 70, 60, 50, 40, 30, 20, 0 ms).

These measured values occur only in a normal heart rate. An abnormal heart rate (premature ventricular

contraction or ventricular tachycardia, for example) or the presence of a pacemaker may cause distortion

of the ST waveform.

NOTE

Although studied widely in human medicine, arrhythmia measurements have not been validated in

veterinary medicine and are offered only as an ancillary tool.

NOTE

The V1410 / V1412 is designed to independently display the ST level for each lead view.

<ST Level Displaying START Screen>

WARNING

The ST level analysis should be judged by qualified veterinary professionals. Arrhythmia

measurements have not been validated in veterinary medicine and are offered only as an

ancillary tool.

Summary of Contents for V1410


















































































































Search results

Summary of Contents for V1410

Reviews:

Brands by name

Popular brands

Vetland V1410, User Manual

Search results

Summary of Contents for V1410

Reviews:

Brands by name

Popular brands