background image

20 

LIMITED WARRANTY: 

VESSEL expressly warrants that  for  a period  of  one  (1)  year  from the date  of  purchase, VESSEL static 
erasers will be free  of defects in material (parts)  and workmanship (labour). Within the warranty  period, 
Defects  occurring  will  be  repaired  or  products  will  be  replaced  at  VESSEL's  option  and  expense,  if 
VESSEL  receives  notice  during  the  warranty  period.  Defective  products  must  be  returned  to  VESSEL 
Osaka Japan with proof  of purchase date. And if your unit is out  of warranty, VESSEL will quote  repair 
charges necessary to ship your unit freight prepaid to where you have originally purchased. 

 

WARRANTY EXCLUSIONS: 

THE  FOREGOING  EXPRESS  WARRANTY  IS  MADE  IN  LIEU  OF  ALL  OTHER  PRODUCT 
WARRANTIES,  EXPRESSED  AND  IMPLIED,  INCLUDING  FITNESS  AND  MERCHANTABILITY  AND 
FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY DISCLAIMED. 
The express warranty will not apply to defects or damage due to accidents, neglect, misuse, alterations, 
operator error, or failure to properly maintain, clean, or repair products. 

 

LIMIT OF LIABILITY: 

This electronic static eraser use high voltage corona discharge and should not be used in or near 
flammable or explosive environments. In no event will VESSEL or any seller is responsible or liable 
for any injury, loss or damage, direct or consequential, whether based in tort or contract arising out 
of the use of or the inability to use the product. Fulfillment of VESSEL's warranty obligations will be 
Customer's exclusive remedy and VESSEL's and Seller's limit of liability for any breach of warranty 
or  otherwise.  Before  using  this  unit,  users  shall  determine  the  suitability  of  the  product  for  their 
intended use, and users assume all risk and liability whatsoever in connection therewith. 

 

Model 

Eye-02 

 

 

Warranty 

(1) year from the date of purchase 

 

Customer 

Name 

 

Address 

 

 

Tel. No. 

 

Dealer 

Name/Address/Tel. No. 

 

 

 

 

 

Manufactured by: 

 

 

17-25, Fukae-Kita 2-chome, 
Higashinari-ku, Osaka    537-0001 Japan 
Tel : +81 6 6976 7778    Fax : +81 6 6972 9441 
E-mail : [email protected] 
URL : http://www.vessel.jp 

                                                                                                                                                       
 

14060400.00010 

Summary of Contents for EYE-02





















Reviews: