6
■
Product Specifications
Names of LCD display parts
■
Preparation and Battery Replacement
Attaching the strap
A strap can be attached to the static electricity measuring device Eye-02. Attach the enclosed strap
to the Eye-02 before starting use. Damage to the device caused by dropping can be prevented by
wearing the device on your wrist during measurements.
Installing the battery
This device runs with a 9 V (006P) battery. The battery is not installed at the time of shipment.
Install the battery with the following procedure.
1) Press down on the indent on the back lid, and slide
the lid open.
2) Connect the battery to the connection plug.
Pay attention to the battery’s polarity.
3) Set the battery into the battery compartment, and
close the back lid.
Installing the battery
REMEMBER
Do not exert excessive pressure; it might damage the lid.
REMEMBER
The connection plug is delicate, so take care when attaching or removing a
battery. Do not connect with force.
REMEMBER
The plug will be damaged when it is connected forcibly in the wrong polarity
terminals.
REMEMBER
Remove the battery when not using the device for a long time to prevent
damage caused by battery leaks.
