Vertiv Liebert EXL S1, Operation And Maintenance Manual

Page: 54 / 131

Component Type Text Display ID Description
Bypass Status Bypass not prepared 01-004
Static switch board is not installed or the bypass voltage is over the threshold (P
106.i04).
Bypass Status Bypass fault 01-005 Set when a blocking fault is active in the stage.
Bypass Status Bypass warning 01-007 Set when at least one warning is active.
Bypass Status
Bypass available with
delay
01-008 Set when the bypass and inverter are not synchronized.
Bypass Status Parallel bypass OK 01-029 All bypass inputs are OK.
Bypass Status
Parallel bypass one
fault
01-030 One bypass input fault exists.
Bypass Status
Parallel bypass at least
one OK
01-031 At least one bypass input is OK.
Bypass Status Parallel bypass fault 01-032 All bypass inputs are in fault.
Bypass Status
Undelayed Bypass Ref.
Failure
01-040 Bypass reference failure notification without any delay.
Bypass Status Bypass is Centralized 01-041
The internal bypass is disabled; the UPS is using the centralized / common
(MSS) bypass.
Bypass Status
Bypass Non-Blocking
Fault
01-042 Set when a non-blocking fault is active in the stage.
Bypass Status
Bypass Global On
Request
01-078 Bypass Static Switch On command request on the shared bus
Bypass Status Bypass Global On 01-079 Bypass Static Switch on global status read from the shared bus.
Bypass Status Bypass Global Off 01-080 Bypass Static Switch Off Global status read from the shared bus.
Bypass Status
Bypass mains is out of
tolerance
11-006 Bypass failure notification without any delay.
Bypass Alarm
Bypass Input Switch
Open
21-012 Bypass input switch is open.
Charger/Booster Status
Charger in Standby -
(not charging)
03-000 —
Charger/Booster Status Charger is on 03-001 —
Charger/Booster Status Charger is off 03-002 —
Charger/Booster Status Charger Forced On 03-003 —
Charger/Booster Status
Charger Stopped due to
a Fault
03-038 —
Charger/Booster Status
Charger in Current
Limitation
03-039 Displayed as long as the voltage reference is lower than the nominal.
Charger/Booster Status Charging Status OFF 03-040 —
Charger/Booster Status Charging Status INIT 03-041 —
Table A.1 Status Messages (continued)
Vertiv™ | Liebert® EXL S1 Operation and Maintenance Guide
50