Specific Methods Of Creating ADFs
4200-002
81
Revision 6
NOTE:
If capture fails, verify the correct COM port and Number of
Cells is selected and, if using Windows 2000 or XP, the IR
port driver is installed.
After
, close the CRT Interface window.
On the Cellcorder, to return to the Main Menu, press Cancel.
Data can be viewed on the File|Properties window.
To save the captured data in the ADF, click File|Save.
Capture Hydrometer Data
This chapter describes how to capture data from the hydrometer data
logger to the computer via IR or RS–232 serial cable. Choose to create a
new ADF or reopen an existing ADF.
NOTE:
If both the Cellcorder and hydrometer have data for the
same parameters, it is important which data the user
captures first, because data captured last overwrites data
captured first. For example, if the user captures SG and
temperature data from the Cellcorder and then the
hydrometer, the hydrometer data will overwrite Cellcorder
data.
Create a new data file
by pressing
on the
toolbar.
or
on the Main Menu,
click File|New.
Figure 160. Create New ADF
Figure 161. File New
