Vertiv Alber Cellcorder CRT-400 User Manual Download Page 135

Page: 135 / 210

Managing Battery Data Files/ADF

4200-002

117

Revision 6

If the destination
is not a scratch
file, Data Sets are
copied from the
source to
destination file
until a duplicate
read date is
encountered.

Figure 238. Warning Window Duplicate Date

Options

At this point, a Warning window appears. Choose one of the following
buttons to obtain the desired results.

Overwrites the identified Data Set.

Overwrites this Data Set and subsequent duplicate dates.

Does not overwrite the identified Data Set.

Does not copy this and subsequent duplicate Data Sets to
the destination. Data Sets already copied will remain.

Stops copying and leaves the destination file unchanged.

NOTE:
At the end of the process, the destination file Comments
area describes the specifics of the extract.

Figure 239. Extract Data Set Comments Destination File

the Extract Data window once all data has been extracted.

Summary of Contents for Alber Cellcorder CRT-400



















































































































































































































Search results

Summary of Contents for Alber Cellcorder CRT-400

Reviews:

Related manuals for Alber Cellcorder CRT-400

Brands by name

Popular brands

Vertiv Alber Cellcorder CRT-400, User Manual

Search results

Summary of Contents for Alber Cellcorder CRT-400

Reviews:

Related manuals for Alber Cellcorder CRT-400

Brands by name

Popular brands