Specific Methods Of Creating ADFs
4200-002
86
Revision 6
7.1.4 Transfer Data Via RS
–232 Port|Cable
If using RS–232, insert the RS–232 cable into
the data logger and then insert the opposite
end of the cable into the RS–232 port on the
PC.
To power on the data logger press the
/ON
button.
NOTE:
This process may be easier to do
if the data logger is disconnected
from the hydrometer.
Press
/
SEL
to select the channel/string A-
H from which data will be transferred.
Figure 172. Data
Logger Front View
NOTE:
The data logger LEDs indicate status as follows:
Fast
– A-H LED flashes fast: Channel has data and is
selected.
Steady
– LED is on: Channel has data but is not selected.
Slow
– LED flashes slowly: Channel is selected but has no
data.
Now, click
on the
Instructions for
Hydrometer window.
Figure 173. Now Click Continue
