Vertical WAVE IP 2500, Hardware Reference Manual

Page: 169 / 210

Menu options A
-
7
Appendix A: Fault Monitor Module and Trace Log
Wave Server Hardware Reference Guide
V - Version and date of Fault Monitor Module
Entering cli v after the DBG prompt, displays the version number of the Fault Monitor Module
and the date it was compiled, as shown in Figure A-2.
Figure A-2
Version and date of the Fault Monitor Module
S - Status
Entering cli s after the DBG prompt, displays the status of the fans and the watchdog timer, as
shown in Figure A-3 (Wave Server system) and Figure A-4 (Wave IP 500 Server).
Figure A-3
Status of the fans and the watchdog timer (Wave IP 500 Server)
Figure A-4
Status of the fan and the watchdog timer (Wave IP 500 Server)
PWROK (Power OK)
Wave IP 2500 Server —This value indicates whether the main and expansion power supplies
and/or the fans are operational. The value 0 means the power supply or fan is not functioning
properly. The value 1 means the power supply and fan is OK.
Wave IP 500 Server —This value indicates whether the main power supply is operational. The
value 0 means the power supply is not functioning properly. The value 1 means the power
supply is OK.
cli v
FMM Version 6.00 Jun 4 2008 19:39:59
cli s
PwrOKMain=1 ,PwrOKExpansion=0 0 0 0
Watchdog enabled: Page-N, Reset-Y
Host is running: Days = 0, Hrs = 20, Mins = 17, Secs = 37
cli s
PwrOKMain=1 Fan status Running
Watchdog enabled: Page-N, Reset-Y
Host is running: Days = 0, Hrs = 20, Mins = 17, Secs = 37
Release 2.0 Service Pack 1 April 2011