Vertical WAVE IP 2500, Hardware Reference Manual

Page: 131 / 210

Indicators 16
-
3
Chapter 16: Quad BRI Module
Wave Server Hardware Reference Guide
Module status indicators
The module status indicators are located on the right of the faceplate. The indicator on the top
is a green LED. The indicator on the bottom is a red LED. The Quad BRI Module is operational
when the green LED lights steadily after the system has fully initialized. The function of the
status LEDs is described in Table 16-1. For more information, refer to “Status indicators” on
page E-7.
Port status indicators
Two port status indicators are located above and incorporated into the RJ-45 connectors to
indicate BRI status. The green LED lights when the associated BRI circuit is ready for use or
actually in use. The amber LED lights for the conditions described in Table 16-1.
.
Port status conditions are tracked and stored in an error log. Refer to the Wave Global
Administrator Guide for information about how to view the error log and to activate the module.
Table 16-1 BRI port status indicators
Amber LED Green LED Status
OFF OFF No signals or no connection detected.
ON OFF The module is not activated in the Wave database.
OFF/ON ON Port is active and/or ready for use.
Release 2.0 Service Pack 1 April 2011