Vertex Standard VXD-7200, Operating Manual

Page: 74 / 84

72
n Lone Worker
This feature prompts an emergency to be raised if
there is no user activity, such as any radio button
press or activation of the channel selector, for a
predefined time.
Following no user activity for a programmed dura-
tion, the radio pre-warns the user via an audio indi-
cator once the inactivity timer expires.
If there is still no acknowledgment by the user be-
fore the predefined reminder timer expires, the ra -
dio initiates an Emergency Alarm.
Only one of the following Emergency Alarms is as-
signed to this feature:
• Emergency Alarm
• Emergency Alarm with Call
• Emergency Alarm with Voice to Follow
The radio remains in the emergency state allowing
voice messages to proceed until action is taken.
See Emergency Operation on page 52 on ways
to exit Emergency.
NOTE : This feature is limited to radios with this
function enabled. Check with your dealer or
system administrator for more information.
n Utilities
1
Setting the Squelch Level
You can adjust your radio’s squelch level to fil-
ter out unwanted calls with low signal strength or
channels that have a higher than normal back-
ground noise.
Settings : “
Normal
” is the default. “
Tight
” filters out
(unwanted) calls and/or background noise. Howev-
er, calls from remote locations may also be filtered
out.
Procedure :
Press the programmed Squelch button to toggle
squelch level between normal and tight.
OR
Follow the procedure below.
1
MENU
to access the menu.
2
or to “
Utilities
” and press
ENTER
to select.
3 or to “
Radio Settings
” and press
ENTER
to
select.
4 or to “
Squelch
” and press
ENTER
to select.
5 Choose either “
Tight
” or “
Normal
” and press
ENTER
to select.
6 Screen returns to the previous menu.
a
DV
ance
D
f
ea
tures