Vertex Standard VXD-7200 Operating Manual Download Page 75

Page: 75 / 84

ance

tures

Setting the Power Level

You can customize your radio’s power setting to

high or low for each channel.

Settings

: “

High

” enables communication with ra

dios located at a considerable distance from you.

“

Low

” enables communication with radios in closer

proximity.

Procedure

Press the programmed

Power Level

button to

toggle transmit power level between high and low.

Follow the procedure below.

MENU

to access the menu.

to “

Utilities

” and press

ENTER

to select.

to “

Radio Settings

” and press

ENTER

select.

to “

Power

” and press

ENTER

to select.

Change your current setting as prompted on the

display.

Press

ENTER

to select a new power level.

Screen returns to the previous menu.

Long press

BACK

to return to the Home screen. The

power level icon is visible.

Turning the Voice Operating Transmission

(

VOX

)

Feature On or Off

This feature allows you to initiate a hands-free

voice activated call on a programmed channel. The

radio automatically transmits, for a programmed

period, whenever the microphone on the VOX-

capable accessory detects voice.

NOTE

: You may need to turn off the radio and

power it up again after detaching the VOX-

capable microphone from it to allow the

radio to switch to another valid accessory.

Pressing the

PTT

button during radio operation will

disable VOX. To re-enable VOX, do

one

of the fol-

lowing:

• Turn the radio off and power it on again, OR

• Change the channel via the Channel Rocker,

• Follow the procedure below.

NOTE

: Turning this feature on or off is limited to

radios with this function enabled. Check

with your dealer or system administrator for

more information.

Procedure

Press the programmed

VOX

button to toggle the

feature on or off.

Summary of Contents for VXD-7200





















































































Search results

Summary of Contents for VXD-7200

Reviews:

Related manuals for VXD-7200

Brands by name

Popular brands

Vertex Standard VXD-7200, Operating Manual

Search results

Summary of Contents for VXD-7200

Reviews:

Related manuals for VXD-7200

Brands by name

Popular brands