Vertex Standard VXD-7200 Operating Manual Download Page 60

Page: 60 / 84

When the channel is free for you to respond, a

short alert tone sounds (

if the Channel Free

Indication feature is enabled). Press the

PTT

button to respond.

Once your call ends, press

Emergency Off

but-

ton to exit the Emergency mode.

The radio returns to the Home screen.

If your radio is set to Silent, it will not display any

audio or visual indicators during Emergency mode,

or allow any received calls to sound through the

radio’s speaker, until you press the

PTT

button to

initiate the call.
If your radio is set to Silent with Voice, it will not

display any audio or visual indicators during Emer-

gency mode, but allow incoming calls to sound

through the radio’s speaker. The indicators will only

appear once you press the

PTT

button to initiate,

or respond to, the call.

Sending an Emergency Alarm with Voice to
Follow

This feature allows you to send an Emergency

Alarm to a group of radios. Your radio’s microphone

is automatically activated, allowing you to commu-

nicate with the group of radios without pressing the

PTT

button.

This activated microphone state is also known as

“hot mic”.

If you press the

PTT

button during the programmed

hot mic transmission period, the radio ignores the

PTT

press and remains in Emergency mode.

NOTE

: If you press the

PTT

button during hot mic,

and continue to press it after the hot mic

duration expires, the radio continues to

transmit until you release the PTT button.

Procedure

Press the programmed

Emergency On

button.

The display shows “

Sending Alarm

”. The green

LED lights up and the Emergency icon is dis-

played.

ance

tures

Summary of Contents for VXD-7200





















































































Search results

Summary of Contents for VXD-7200

Reviews:

Related manuals for VXD-7200

Brands by name

Popular brands

Vertex Standard VXD-7200, Operating Manual

Search results

Summary of Contents for VXD-7200

Reviews:

Related manuals for VXD-7200

Brands by name

Popular brands